| Terminal at PMD-1208LS | Signal | Used wire | Terminal at leak testing station |
| # 1 (Channel #0, HI) | Temperature (T2) | green | Analog voltage out |
| # 2 (Channel #0, LO) | bridge to GND (DAQ Pin #3) | ||
| # 3 (GND) | bridged to DAQ Pin #2 | ||
| # 4 (Channel #1, HI) | Atmospheric pressure (PA2) | yellow | white 4 mm terminal |
| # 5 (Channel #1, LO) | bridge to GND (DAQ Pin #6) | ||
| # 6 (GND) | bridged to DAQ Pin #5 | ||
| # 7 (Channel #2, HI) | Differential pressure, HI signal (PD2) | blue | Analog voltage out |
| # 8 (Channel #2, LO) | Differential pressure, LO signal (PD2) | white | Analog RTN |
| # 9 (GND) | GND | black | any black 4 mm terminal |
| #10 (Channel #3, HI) | System pressure (PS2) | red | white 4 mm terminal |
| #11 (Channel #3, LO) | bridge to GND (DAQ Pin #12) | ||
| #12 (GND) | bridged to DAQ Pin #11 |
More information on the USB DAQ Device "PMD-1208LS" can be found here:
Christian Mester, 2004-03-26